Victron Self-Consumption and Back-Up Battery System (Hub-2) 6.4kw LG Chem Lithium Battery

• LG Chem LI-IO Retrofit 6.4 kWh Lithium Battery Module For RESU6.4
• SMA SB 3600TL-21 SUNNY BOY 3600TL INVERTER
• VICTRON Multiplus 48/3000/35-50 Inverter Charger
• Victron Color Control GX Display/Monitor
• Victron 40A Wired AC Current Sensor
• NH1 Fusebox Jean Mueller
• 2x NH1 Fuse 250a
• 1 meter 95mm battery cable
• 1 x 6mm solar cable 100m

Additional:

• Up to two 3.2kWh expansion modules can be simply added in order to increase the storage capacity up to a maximum of 12.8kW
• 3.5kW solar array (14x Axitec Power AC-250P/156-60S 250W Polycrystalline solar panel)

The Victron Hub-2 solar PV battery storage system helps reduce bills by storing any unused generation into batteries. The power can then be called upon when generation is lower than consumption, reducing or even stopping energy being imported.

The entire electricity supply goes through the inverter/charger meaning it can decide when to draw power from the grid and when to utilise the solar system or battery storage. Through this method back-up power for the entire property will be provided in the event of a power cut and the solar PV system will remain operational.

This can be added on to almost any existing solar PV system.

Features

• Grid parallel energy storage system to optimise self consumption & provide back-up power
• Wide range of available inverter/chargers: 800 VA to 10,000 VA in 12, 24 and 48 VDC
• Back-up power for the entire property
• Built-in certified anti-islanding (not all models)
• Free usage of the VRM Portal and the VRM App for remote monitoring
• Solar operates when there is a power cut
• Retrofittable to any solar system
• Complies with UK standards without additional G59/3 relay